织物表面导电线路喷射打印起始端凸起形成过程研究

为提高织物表面微滴喷射打印导电线路的成形质量,针对导电线路喷射打印过程中线路沉积形貌的起始端凸起现象,利用高速相机对线路成形过程进行采集,研究微滴间融合振荡过程中左右接触角的动态变化,微滴与线路融合以及液体向线路起始端的输送过程,提出线路起始端凸起的消除方案并进行实验。结果表明:在融合振荡过程中,微滴向起始端的振荡趋势始终大于向另一侧的振荡趋势,导致打印线路起始端的织物基板润湿区域不断扩大;微滴与线路接触后,其中一部分液体润湿织物基板拓展线路长度,一部分通过线路以恒定速度输送至起始端,在线路起始端形成凸起;利用抗坏血酸溶液润湿织物表面后,成形线路起始端凸起现象得到消除,整体线路路径均匀,沉积形貌良好。     

CFD modeling of thermal contact resistance between solid contacting surfaces

Heat transfer has considerable applications in different industries such as designing of heat exchanger, nuclear reactor cooling, control system for spacecraft, and designing of microelectronics cooling. As the surfaces of two metals contact each other, this issue becomes so crucial. Thermal contact resistance (TCR) is one of the key physical parameters in heat transfer of mentioned surfaces. Measuring the experimental value of TCR in laboratory is highly expensive and difficult. As an alternative, numerical modeling methods could be engaged. In this study, inverse problem method solution is utilized as a proper method for estimation of TCR value. In this order, three different configurations (flat-flat, flat-cylinder, and cylinder-cylinder) were utilized in two steady and unsteady state conditions to predict the value of TCR. A comparison between the measured values and obtained values from the simulation show the errors for flat-flat, flat-cylinder, and cylinder-cylinder configuration after 10 min from starting the experiment are 4.6074%, 0.1662%, and 0.5622%, respectively. And in steady-state condition, the corresponding errors are 6.06e-3%, 1.506%, and 0.846%, respectively. In conclusion, the final results establish the fact that the inverse problem method solution can predict TCR values between contacting surfaces.     

Astragali Radix-derived nitrogen-doped porous carbon: An efficient electrocatalyst for the oxygen reduction reaction

The development of biomass-derived nitrogen-doped porous carbons (NPCs) for the oxygen reduction reaction (ORR) is important for sustainable energy systems. Herein, NPCs derived from Astragali Radix (AR) via a cost-effective strategy are reported for the first time. The as-prepared AR-950-5 catalyst shows a stacked layer-like structure and porosity. Notably, the optimized AR-950-5 delivers catalytic activity comparable to that of commercial Pt/C (C-Pt/C), with high onset potential, positive half-wave potential and large limiting current density. It also displays superior long-term stability and methanol tolerance for ORR. This work will pave the way for a new approach in the development of highly active and low-cost NPCs for fuel cells.     

Tunable Spectrum Selectivity for Multiphoton Absorption with Enhanced Visible Light Trapping in ZnO Nanorods

Observation of visible light trapping in zinc oxide (ZnO) nanorods (NRs) correlated to the optical and photoelectrochemical properties is reported. In this study, ZnO NR diameter and c‐axis length respond primarily at two different regions, UV and visible light, respectively. ZnO NR diameter exhibits UV absorption where large ZnO NR diameter area increases light absorption ability leading to high efficient electron–hole pair separation. On the other hand, ZnO NR c‐axis length has a dominant effect in visible light resulting from a multiphoton absorption mechanism due to light reflection and trapping behavior in the free space between adjacent ZnO NRs. Furthermore, oxygen vacancies and defects in ZnO NRs are associated with the broad visible emission band of different energy levels also highlighting the possibility of the multiphoton absorption mechanism. It is demonstrated that the minimum average of ZnO NR c‐axis length must satisfy the linear regression model of Z _p,min = 6.31d to initiate the multiphoton absorption mechanism under visible light. This work indicates the broadening of absorption spectrum from UV to visible light region by incorporating a controllable diameter and c‐axis length on vertically aligned ZnO NRs, which is important in optimizing the design and functionality of electronic devices based on light absorption mechanism.     

改性淀粉抑制赤铁矿反浮选石英的作用机理研究

通过矿物浮选试验、动电位测定以及吸附量测试,考察了4种淀粉抑制剂对赤铁矿和石英浮选性能的影响,并探讨了其作用机理。在碱性条件下,改性淀粉抑制剂对赤铁矿抑制效果明显,且以改性玉米淀粉效果最佳,改性磷酸酯淀粉、改性羧甲基淀粉的抑制效果次之,而普通淀粉抑制作用一般。同时4种淀粉抑制剂对主要脉石矿物石英的抑制效果均不明显。pH=10~12.5条件下,改性玉米淀粉因其羟基氧和裸露在赤铁矿表面的铁元素发生了化学键合,因而选择性抑制能力最佳。分子动力学模拟表明,改性玉米淀粉片段与赤铁矿作用更为紧密,验证了改性淀粉能更好地抑制赤铁矿。     

不忘初心，创新前行——广州城建开发设计院有限公司成立35周年有感

广州城建开发设计院有限公司，伴随着建筑行业的发展而成长，已经经历了35个春秋，足迹遍布了全国20多个城市。具有建筑工程设计甲级、城市规划甲级、建筑工程咨询甲级、风景园林设计乙级等资质。总部位于广州，并设有南沙、武汉、沈阳3个分院和华东区域办事处。是全国勘察设计行业中的优秀企业，2013年被中国勘察设计协会评为全国勘察设计行业“创优型企业”。公司成立35年来，获得国家级、建设部、广东省、广州市的优秀规划、优秀工程设计和优秀科研成果奖项278个,詹天佑土木工程大奖3项。其中获2017年度全国优秀工程勘察设计行业奖，住宅和住宅小区类获奖数量名列全国第四、广东省第二；2017年度广东省优秀工程勘察设计奖，获奖数量再次位居全省建筑类设计院前十；2016年建筑类获得广州市优秀工程设计奖数量名列全市第二位；2016、2014、2012年绿色建筑获得广州市优秀设计奖数量连续三届名列全市第一位；2009年取得高新技术企业称号,完成包括政府委托课题在内的106个课题研究,获得国家专利27项。在全国性和省、市专业刊物上发表学术论文500多篇。公司目标是发展成为最具创新能力的研究型设计企业。 　　今年是城建设计院成立35周年，记得5年前在城建设计院成立30周年的时候，我在《南方建筑》发表了题为“传承岭南文化 创新设计理念”的文章，对过去30年发展的历程进行了回顾，对城建设计院立足岭南，汲取岭南传统文化精华，运用现代科技手段，不断创新，将“传承”和“创新”有机结合创作出的优秀作品进行了回顾。而今天，我从另一个角度，就近年来城建设计院不忘初心，围绕成就美好生活目标，以研发为先导，产研结合，开展全链条设计服务，开拓新业务方面的做法进行介绍。     

Vertically aligned reduced graphene oxide/Ti3C2Tx MXene hybrid hydrogel for highly efficient solar steam generation

Effective utilization of abundant solar energy for desalination of seawater and purification of wastewater is one of sustainable techniques for production of clean water, helping relieve global water resource shortage. Herein, we fabricate a vertically aligned reduced graphene oxide/Ti₃C₂T_x MXene (A-RGO/MX) hybrid hydrogel with aligned channels as an independent solar steam generation device for highly efficient solar steam generation. The vertically aligned channels, generated by a liquid nitrogen-assisted directional-freezing process, not only rapidly transport water upward to the evaporation surface for efficient solar steam generation, but also facilitate multiple reflections of solar light inside the channels for efficient solar light absorption. The deliberate slight reduction endows the RGO with plenty of polar groups, decreasing the water vaporization enthalpy effectively and hence accelerating water evaporation efficiently. The MXene sheets, infiltrated inside the A-RGO hydrogel on the basis of Marangoni effect, enhance light absorption capacity and photothermal conversion performance. As a result, the A-RGO/MX hybrid hydrogel achieves a water evaporation rate of 2.09 kg·m⁻²·h⁻¹ with a high conversion efficiency of 93.5% under 1-sun irradiation. Additionally, this photothermal conversion hydrogel rapidly desalinates seawater and purifies wastewater to generate clean water with outstanding ion rejection rates of above 99% for most ions.

     

济阳坳陷下古生界潜山油气藏特征及成藏模式

济阳坳陷下古生界潜山具有多样性、复杂性的特点，潜山差异性的形成演化、油气成藏主控因素和控藏模式不明确，严重制约了该区潜山油气勘探。在潜山分类的基础上，综合利用系统恢复、分类对比和典型解剖等方法，揭示了济阳坳陷下古生界不同类型潜山的形成演化过程和油气成藏主控因素差异性，分类建立了油气成藏模式。研究表明，济阳坳陷下古生界主要发育高位新盖侵蚀残丘潜山、中位古盖拉张断块潜山、中位新古盖拉张剪切断块潜山、中位中古盖挤压拉张断块潜山和低位古盖拉张滑脱断块潜山5种潜山类型。不同类型潜山的形成演化和油气成藏各具特色，其中，高位新盖侵蚀残丘潜山的发育受隆升、侵蚀作用控制，油气成藏主要受控于油源和盖层条件，表现为"单向供烃、砂体-不整合岩溶体联合输导、残丘控藏"的成藏模式；中位古盖拉张断块潜山的发育受掀斜、断裂作用控制，油气成藏主要受控于储集条件，表现为"单向供烃、顺向断层输导、反向断层控藏"的成藏模式；中位新古盖拉张剪切断块潜山的发育受反转、翘倾和走滑切割作用控制，油气成藏主要受控于输导条件，表现为"多源供烃、断溶体立体输导、断裂控藏"的成藏模式；中位中古盖挤压拉张断块潜山的形成受强烈挤压、拉张滑脱作用控制，油气成藏主要受控于储集条件，表现为"多源供烃、断缝体输导、断褶控藏"的成藏模式；低位古盖拉张滑脱断块潜山的形成受强烈拉张滑脱作用控制，油气成藏主要受控于输导条件，表现为"顶部供烃、断缝体输导、断裂控藏"的成藏模式。     

采动覆岩卸荷膨胀累积效应

地下煤层开采引起的岩层运动是一系列安全和环境问题的根源,研究采动岩层运动规律是安全、高效、绿色开采的重要基础。通过对岩层运动过程的研究,揭示了采动覆岩卸荷膨胀累积效应及其对岩层运动规律的影响机制。研究表明:采动覆岩经历了卸荷膨胀与再压实的动态过程。受关键层结构控制,上覆岩层由下向上成组破断运动,关键层破断前,阻断了上覆载荷向下方岩层的传递,导致其因卸荷而产生膨胀,包括碎胀与弹性膨胀。随着关键层破断高度增加,覆岩卸荷高度同步增大,因卸荷而膨胀的岩层总厚度不断增大;同时卸荷煤岩也受到已破断关键层载荷的压实作用,从而造成覆岩卸荷膨胀总量的不断变化。将这种覆岩卸荷膨胀总量随覆岩卸荷高度动态变化的现象定义为采动覆岩卸荷膨胀累积效应,进而建立了理论模型,并通过淮北海孜煤矿巨厚火成岩下采煤覆岩裂隙实测进行了验证。结果表明,采动覆岩卸荷膨胀累积效应对采动岩层运动规律产生了重要影响,如影响覆岩关键层下离层量,影响覆岩关键层贯通破断的高度,影响不同开采条件的地表下沉系数等。采动覆岩卸荷膨胀累积效应改变了对离层存在形式的传统认识,该效应的存在导致关键层下最大离层量一般小于采高的10%,覆岩可注浆充填空间并非传统认识上的“离层区”,而主要是注浆充填压力“压实”作用下将覆岩卸荷累积膨胀所转化出的那部分空间,该发现指导了覆岩隔离注浆充填绿色开采技术的创新研发及其在建筑物压煤开采中的成功实践。